| |
ID |
Product |
Manufacturer |
Model # |
Model 2 |
Status |
|
 | 3138 | Arrayer | Genomic Instruments | MTSO | | Available |
Description/Details:
|
|
|
 | 6493 | Automation / HTS: Assay System | Caliper Life Sciences | Staccato RapidPlate Cell Assay System | Cell Based/ ELISA system | Available |
Description/Details:
Includes the following:
- Caliper LS RapidPlate 96/384 Liquid Handler w/Controller
- Caliper LS Twister II Microplate Handling Robot w/Dual Pod Configuration
- Liconic STX 40 SA/IC Incubator with Shuttle & De-Lidding
- Caliper LS iBLOX Automation Table
- Caliper LS iLink Pro Method Development & Scheduling Software
- Barcode Reader
- Cabling & Interface Kit
- Operator’s Manuals
Product Description:
Utilizing proven and robust "automation-friendly" building blocks, Caliper has created compact, reliable solutions that cost less than conventional approaches, take up little lab space and allow scientists and researchers to focus more of their time on science and less on engineering.
The Staccato Cell Station - Assay is a remarkably compact system for performing a variety of cell based assays and is unlike custom systems which typically require long deliver... |
|
|
 | 3722 | Automation:2-Axis Motion Controller | Parker | 6201-120V | | Available |
Description/Details:
Two Axis Motion Controller |
|
|
 | 2968 | Automation:Cover Slipper | Meisei | RCM-3660 | | Available |
Description/Details:
The HACKER-MEISEI RCM3660 Robot Coverslipping Machine is a fully enclosed, automated, robotic system which coverslips microscope slides. The RCM3660 employs the exclusive, patented “pressure bending method” for dispensing and applying the glass coverslips. Coverslips are rolled in place, insuring optimum coverage and air tight seal, emulating the preferred manual method.
Unlike manual methods, the RCM guarantees consistent quality, continuous productivity, component compatibility with other automated procedures, and considerable savings in reagents, consumables and overtime.
The RCM3660 frees technicians to attend to other laboratory functions which require their hands-on attention. Contact with potentially hazardous reagents will be minimized, while RCM’s fully enclosed system contributes to a healthier, safer laboratory environment. All at an average rate of 12 seconds per slide! ... |
|
|
 | 6126 | Automation:Enclosure | Flow Sciences | FS5000-108 | | Available |
Description/Details:
A vented enclosure with a face opening that provides negative pressure allowing particles and vapors to be drawn out of the enclosure and into a HEPA filtration unit or to existing house-exhaust. Vented Robotic Enclosures are designed to provide protection for laboratory workers. Flow Sciences’ turbulence-free design optimizes containment providing a safe work environment. These enclosures are designed with personnel protection as the highest priority while working with lab automation or robotic equipment. Designs have been created for the most popular robot manufacturers.
Enclosures are custom designed to meet the unique access needs of each robot while also providing excellent visibility for the operator
Dims:
52x28x37
... |
|
|
 | 6127 | Automation:Enclosure | Flow Sciences | FS5000-106 | | Available |
Description/Details:
A vented enclosure with a face opening that provides negative pressure allowing particles and vapors to be drawn out of the enclosure and into a HEPA filtration unit or to existing house-exhaust. Vented Robotic Enclosures are designed to provide protection for laboratory workers. Flow Sciences’ turbulence-free design optimizes containment providing a safe work environment. These enclosures are designed with personnel protection as the highest priority while working with lab automation or robotic equipment. Designs have been created for the most popular robot manufacturers.
Enclosures are custom designed to meet the unique access needs of each robot while also providing excellent visibility for the operator
Dims:
52x28x37
... |
|
|
 | 3081 | Dispenser | Apricot Designs | PP-125N | MS96 | Available |
Description/Details:
Description PP-125 Series:
The Apricot Personal Pipettor is an entry-level liquid handling instrument offering a unique interchangeable pipetting head system for automated pipetting into 96-, 384- and 1536-well microplates. Apricot systems are available in single or 4-position models with dispense ranges from 1 µL to 550 µL.
At a dispense volume of 1 µL, the Apricot Pipettor offers <5% CV for unmatched precision. Choose between either disposable tips or stainless steel, Teflon®-coated probes in 96- or 384- tip configurations. Labware can be automatically indexed to 96-, 384- and 1536-well plates.
... |
|
|
 | 2427 | Dispenser | Apricot Designs | PP-550-MS4S | | Available |
Description/Details:
96 channel pipettor - four station systems. The PP-550N-MS 96 channel four station pipettor exhibits all of the precision, accuracy and durability of the PP-550DS but with a four station labware transporting mechanism. And instead of front panel control it is programmed via an external computer. PP-550N-MS is highly regarded as an ideal assay development tool in the drug discovery processes. Pipetting volume is from 1 to 550 µL and a range of interchangeable pipetting heads is available.... |
|
|
 | 4152 | Dispenser | Apricot Designs | TPS-384-35 | | Available |
Description/Details:
The TPS-384 offers 384 channel high performance pipetting that is ideal for low-volume multichannel microplate pipetting and for serial dilution applications. The microprocessor-controlled pipetting mechanism provides accurate and precise pipetting of microliter or sub-microliter volumes of samples into 96, 384 or 1536-well microplates. The high-speed pipetting system provides short processing times by delivering liquids through up to 384 channels simultaneously with precise volume control.... |
|
|
 | 4115 | Dispenser | Genetix | Aliquot | | Available |
Description/Details:
The aliquot from genetix is a low volume non-contact liquid dispenser compatible with 96, 384, and 1536 well microplates. With its accuracy, versatility, fast dispensing action, backfilling facility and optional microplate stacker, the aliquot is the complete solution to your low volume dispensing needs. The aliquot's compact design and autoclavable parts make it ideal for sterile use in a laminar flow cabinet. An optional stacker unit is available, which holds up to 40 low-profile genetix microplates, and includes automated lid removal and replacement for walkaway convenience.... |
|
|
 | 4204 | Dispenser | Genetix | QFill2 (QStack Referenced on 4204a) | | Pending |
Description/Details:
The Genetix QFill2 is a simple, rapid and versatile microplate filler. Critically, for sterile applications such as dispensing bacterial growth media and mammalian cell culture media, the QFill2 has a small enough footprint to be sited in a laminar flow hood.
The entire flow path can be removed and autoclaved to ensure sterility between runs. 96 and 384-well plate formats can be used with this system and a range of manifolds offer the ability to use microplates of differing depths including deep-well blocks.
The instrument can fill a 384-well microplate in under 10 seconds with a CV of <5% (for a 40µl volume). For higher throughout applications, the QStack can be mated with the QFill2 to allow unattended filling of up to 35 microplates with the capacity to lid and de-lid the plates.... |
|
|
 | 2750 | Dispenser | LabSystems | Multidrop 96 | Type 831 | Available |
Description/Details:
Description:
The Multidrop dispensers are the most robust in their class. By design, they are compact in size, easy to use and maintain, with features that prevent cross contamination and save on reagents. For higher throughput needs, Multidrop dispensers can be easily integrated to robotic setups.
... |
|
|
 | 2830 | Dispenser | Robbins Scientific | Hydra 96 | FlexChem Microdispenser | Available |
Description/Details:
The Hydra microdispenser from Robbins Scientific Corporation is a bench-top instrument providing high-speed, repetitive dispensing of microliter and nanoliter volumes into microplates, 96 or 384 samples at a time. The Hydra microdispenser features 96 (or 384) glass syringes held in a fixed array. The array forms a horizontal X-Y grid that aligns each needle in the exact center of a well in a microplate. A precision motor assembly moves the plungers within the syringes up and down under microprocessor control, dispensing or aspirating liquids to or from microplates and other receptacles. The Hydra microdispenser has a motorized platform that allows you to position microplates and other labware under the syringe array to dispense or aspirate liquids.... |
|
|
 | 4070 | Dispenser | Robbins Scientific | Hydra 96 | | Available |
Description/Details:
Hydra microdispenser from Robbins Scientific Corporation is a bench-top instrument providing high-speed, repetitive dispensing of microliter and nanoliter volumes into microplates, 96 or 384 samples at a time. The Hydra microdispenser features 96 (or 384) glass syringes held in a fixed array. The array forms a horizontal X-Y grid that aligns each needle in the exact center of a well in a microplate. A precision motor assembly moves the plungers within the syringes up and down under microprocessor control, dispensing or aspirating liquids to or from microplates and other receptacles. The Hydra microdispenser has a motorized platform that allows you to position microplates and other labware under the syringe array to dispense or aspirate liquids. ... |
|
|
 | 2841 | Dispenser | Titertek | Digiflex Pipette | 52072 | Available |
Description/Details:
Preprogrammed,accurate, precise pipetting
Total program flexibility
Inert liquid pathway
Programmable syringe speeds and time delays
Direct drive accuracy.... |
|
|
 | 4194 | Dispenser | Titertek | Multidrop 384 | Type 832 | Available |
Description/Details:
Description:
Multidrop 384 dispensers are the most robust in their class. By design, they are compact in size, easy to use and maintain, with features that prevent cross contamination and save on reagents. For higher throughput needs, Multidrop dispensers can be easily integrated to robotic setups. The Multidrop 384 is optimized for dispensing into 384 and 96-well plates when the required volume per well is 20 μl or more. ... |
|
|
 | 2836 | Dispenser | Robbins Scientific | Autowash Module | | Available |
Description/Details:
Peristaltic pump unit for a plate washer (platewasher).
Power: 120V / 50/60Hz / 6A |
|
|
 | 4340 | Dispenser | LabSystems | Multidrop 96 | Type 831 | Available |
Description/Details:
Description:
The Multidrop dispensers are the most robust in their class. By design, they are compact in size, easy to use and maintain, with features that prevent cross contamination and save on reagents. For higher throughput needs, Multidrop dispensers can be easily integrated to robotic setups.
... |
|
|
 | 5095 | Dispenser | Thermo Labsystems | Multidrop 96 | Type 831 | Available |
Description/Details:
Description:
The Multidrop dispensers are the most robust in their class. By design, they are compact in size, easy to use and maintain, with features that prevent cross contamination and save on reagents. For higher throughput needs, Multidrop dispensers can be easily integrated to robotic setups.
... |
|
|
 | 5164 | Dispenser | Titertek | Multidrop 384 | Type 832 w/Titan Stacker | Available |
Description/Details:
Description:
Multidrop 384 dispensers are the most robust in their class. By design, they are compact in size, easy to use and maintain, with features that prevent cross contamination and save on reagents. For higher throughput needs, Multidrop dispensers can be easily integrated to robotic setups. The Multidrop 384 is optimized for dispensing into 384 and 96-well plates when the required volume per well is 20 μl or more. ... |
|
Newsletter
