| |
ID |
Product |
Manufacturer |
Model # |
Model 2 |
Status |
|
 | 6226 | Fermentation:Reactor | Applikon | ASA 1012 | ADI 1012/03/03 | Pending |
Description/Details:
Originally used with one of Applikons bioreactor systems. Make: Applikon Model: ADI1012 Power: Switchable 220/230/240V or 110/120V... |
|
|
 | 6227 | Fermentation:Reactor | Applikon | ADI 1012 | | Pending |
Description/Details:
OVERALL DIMENSIONS:
WIDTH: 6"
LENGTH: 11.5"
HEIGHT: 5"
220,230240/110,120 Vac 50/60Hz
|
|
|
 | 6228 | Fermentation:Reactor | Applikon | ADI 1012 | | Pending |
Description/Details:
OVERALL DIMENSIONS:
WIDTH: 6"
LENGTH: 11.5"
HEIGHT: 5"
220,230240/110,120 Vac 50/60Hz
|
|
|
 | 4005 | Rocker | Boekel Scientific | Orbitron Rotator II | 260250 | Available |
Description/Details:
Gentle, low foaming agitation
Small footprint
Can be used in cold room or incubator
Accepts a wide variety of tubes, plates,
dishes, simultaneously with no need for
unwieldy racks or clamps
Thin power cord easily passes through
incubator door gaskets
Rugged steel platform has notches for
bungee cords if necessary
Rubber mats can be cleaned with soap and water and autoclaved too.
Can operate at 4ºC to 40ºC
Variable Speed 6-23 orbits/min
Variable Tilt Angle - 0º - 23º
Load Limit 1 kg (2.25 lbs)
Tray Dimensions30.5 cm x 30.5 cm (12” x 12”)
Power 115 VAC; 50/60Hz, 6 Watts, 0.5 amps
... |
|
|
 | 5584 | Rocker | Labnet | ProBlot Rocker 35 | S2035-D | Available |
Description/Details:
Labnet’s ProBlot 35 Deluxe Rocker is made for those laboratories requiring a larger platform area and precise control over rocking parameters
Both speed and degree of tilt are adjustable across a broad range to provide the exact level of agitation required for all types of samples. The rocker is equipped with a 2 hour timer that can also be set for continuous operation
The heavy duty motor and sturdy rocking platform can support loads of up to 15 pounds. Closed loop, solid state speed control ensures that the rocker operates at constant speed regardless of voltage or load fluctuations. Permanently lubricated ball bearings provide years of maintenance-free operation.
The ProBlot 35 Deluxe Rocker is available with a single platform, or for added workspace, two stacked platforms. Each platform is covered with a nonslip rubber mat to keep sample containers in place. The rocker can be used in environments from 4° to 65°C, making it safe for cold room or incubator use. ... |
|
|
 | 3134 | Shaker | IKA | VIBRAX-VXR S1 | | Available |
Description/Details:
Optoelectronically controlled shaker with wide speed range.
* Suitable for continuous operation
* Circular shaking motions
* Slow speeds are well maintained
* Attachments are interchangeable
... |
|
|
 | 3135 | Shaker | IKA | VIBRAX-VXR S1 | | Available |
Description/Details:
Optoelectronically controlled shaker with wide speed range.
* Suitable for continuous operation
* Circular shaking motions
* Slow speeds are well maintained
* Attachments are interchangeable
... |
|
|
 | 3123 | Shaker | Lab-Line Instruments | Titer Plate Shaker, 6 Position | 4625SAG | Available |
Description/Details:
Holds four titer plates. Shaking speeds from 40 to 1100 rpm. Can run continuous or timed up to 5 min. Lab-Line 6-Position Automated Microplate Shaker Consisting of the Following:
- Lab-Line 4625 Shaker Base
- 6-Position Platform
- Sagian Control Module
- Interface Cable & Power Cord
- Alignment Base... |
|
|
 | 3125 | Shaker | Lab-Line Instruments | Titer Plate Shaker, 6 Position | 4625SAG | Available |
Description/Details:
Holds four titer plates. Shaking speeds from 40 to 1100 rpm. Can run continuous or timed up to 5 min. Lab-Line 6-Position Automated Microplate Shaker Consisting of the Following:
- Lab-Line 4625 Shaker Base
- 6-Position Platform
- Sagian Control Module
- Interface Cable & Power Cord
- Alignment Base... |
|
|
 | 3133 | Shaker | Lab-Line Instruments | Titer Plate Shaker | 4625 | Available |
Description/Details:
Holds four titer plates. Shaking speeds from 40 to 1100 rpm. Can run continuous or timed up to 5 min. Lab-Line 6-Position Automated Microplate Shaker Consisting of the Following:
- Lab-Line 4625 Shaker Base
- 6-Position Platform
- Sagian Control Module
- Interface Cable & Power Cord
- Alignment Base... |
|
|
 | 3130 | Shaker | Lab-Line Instruments | Titer Plate Shaker, 6 Position | 4625SAG | Available |
Description/Details:
Holds four titer plates. Shaking speeds from 40 to 1100 rpm. Can run continuous or timed up to 5 min.
Features the Following:
- Solid-State Controls
- Shaking speed range: 40 to 1100 rpm
- Orbit: 3/4”
- Timer: 0 to 5 minutes or Continuous Run
- Electrical: 115VAC/60Hz/1 Phase
... |
|
|
 | 3131 | Shaker | Lab-Line Instruments | Titer Plate Shaker | 4625 | Available |
Description/Details:
Holds four titer plates. Shaking speeds from 40 to 1100 rpm. Can run continuous or timed up to 5 min.
Features the Following:
- Solid-State Controls
- Shaking speed range: 40 to 1100 rpm
- Orbit: 3/4”
- Timer: 0 to 5 minutes or Continuous Run
- Electrical: 115VAC/60Hz/1 Phase
... |
|
|
 | 4691 | Shaker | IKA | Minishaker | MS1 S1 | Available |
Description/Details:
Compact orbital shaker is suited for test tubes, small containers, and microtiter plates. Low-profile design with knobbed feet for stability on work surface. Minishaker includes a rubber cup attachment, test tube attachment with foam insert, test tube insert with 6 × 10mm holes, and microtiter plate attachment.
CE compliant
• Two modes of operation: continuous and touch
• Orbital diam.: 4.5mm
• Max. shaking weight (with attachment): 0.5kg
• Speed range: 0 to 2,500rpm (test tube attachment and microtiter plate run up to 1,000rpm)... |
|
|
 | 4692 | Shaker | IKA | KS 125 | BS1 | Available |
Description/Details:
Platform Shaker IKA model KS125 Basic
This unit is designed for vigorous shaking of small samples and features electronically controlled shaking speed and a timer.
Shaker type Orbital
Shaking frequency 0 to 1500 cycleslmin
Shaking amplitude 4 mm
Load max 2-5 kg
Platform dimensions l x w 165 x 200 mm
Overall dimensions l x w x h 210 x 325 x 120 mm
Weight (without attachments) 7 kg
Electrical requirements 230V 50Hz
... |
|
|
 | 4728 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
|
 | 4729 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
|
 | 4730 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
|
 | 4731 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
|
 | 4732 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
|
 | 4733 | Shaker | IKA | KS 250 | | Available |
Description/Details:
Ths IKA series 250 shakers accept loads up to 5kg in weight and utilizes orbital shaking motion. The shaker maintains a smooth action even when running with an unevenly distributed load. The unit can be operated in continuous mode or by a 60 minute timer with one minute increments, cycle time being set by an analogue dial. Various accessories and attachments can be utilized to make the shaker a good choice for nearly any laboratory task.
Shaker type Orbital
Shaking frequency cycles/min 0 to 500
Shaking amplitude mm 10
Load max kg 5
Platform dimensions l mm 320 x 320
Overall dimensions l mm 360 x 430 x 120
Weight (without attachment) kg 10
Electrical requirements 240V 50Hz
... |
|
Newsletter
